Discover the ECUHELP KT200 feedback on ECU read/write. Learn which ECUs have been reported as compatible (OK) or incompatible (NO) with KT200. Stay informed about successful and unsuccessful attempts, enabling you to make informed decisions for your ECU programming needs.

Q: KT200 DCM3 2ap in ssyang Yong rexton. How read? only obd? or bench?
A: yes only Mercedes DCM3.2 read in jtag mode. 

Q: Since updating the KT200 program to the latest version, I am unable to write the edc17c60 ecu. reads the content. but the modified file chks for 30 minutes. then I press OK and the internet connection interrupts the writing with an error. my internet connection is stable.
A: i suspect your mod file to be problem, but for edc17c60 please do manual checksum, tool will apply Tprot patch when writing - do not do this manually.
It seems that the issue might be related to your modified file. However,  for edc17c60 please do manual checksum, tool will apply Tprot patch when writing - do not do this manually.

Q: Has anyone attempted using KT200 on a John Deere L34/L33?
A: Yes, connect directly to the ECU for that.

Q: pcr 2.1 audi a3 2013y bench normally r/w? 1.6tdi 105cv
A: yes will also allow you to unlock for OBD ( PATCH)

Q: Can I bench read/write PCR 2.1 Audi A3 (2013) with a 1.6 TDI engine (105cv)?

A: Yes, KT200 will allow you to Bench read/write and also unlock it for OBD (PATCH) functionality.

Q: I tried to OBD and Bench read / write Audi A4 ME 7.5.5 with failure. However, using MPPS OBD did the job.
A: Yes, it's better to rely on older tools for older ECUs in such cases.

ECUHELP KT200 Feedback OK List: 
KT200 full version with online and offline function Is best, is a bit more expensive but is the best.

Never fail to me kt200

Kt200....amazing my friend...has not let me down yet.

Psa - edc16c34 bench
Edc15c2 bench
Edc17c10 bench
Edc17c60 bench
Dcm6.2a obd, dcm 6.2c obd
Md1cs003 bench 2019
Subaru Forester 2.0 denso ecu obd

Md1cs006 bench cheksum with tool
Delphi dcm3.5 psa obd
Delco e87 opel obd
Delco E98 opel bench
Delphi crd3.4 Benz bench
Edc16c3 psa bench with resistor
Edc15c2 bench without resistor 
Edc17c41 bmw bench
Med17.5 audi bench
Edc17c42 renault bench
Medc17.9 bench....
Vag pcr2.1
Ford dcu104
BMW MEV9
VIVARO edc16c36
Psa mev17.4
Vag Med17.1.27
Ducato mjd8f3
Opel edc17c59
Fiat mjd6f3
Evoque medc17.9
Touran 17c74 crs ok by kt200
Mini edc17c50
Psa sid807
Psa sid803a
Alfa edc15c7
Psa dcm3.5
Psa me 745
Bmw17c06
Most of them bench or full

Kt200 PSA edc17c84 bench r/w cks ok

Kt200 FCA edc17c79  bench r/w cks ok

Kt200 Mitsubishi Denso 4D56 Full Manual CKS R/W OK

Today tested it on 2019 BMW 320d MD1CS001, bench read/write/checksum, all good 

2020 Mitsubishi L200 denso 4n14 ma276700 read write chk ok

ECUHELP KT200 Read write sid807 evo psa boot tc 1797 work fine

E98 read / write in Full system bench mode no issues. 
ECUHELP KT200 works


Volvo V50 EDC16C34 Bench mode
5.R/W OK
KT200 works

Vauxhall/opel E78 full system CANBUS 100% ok 
KT200 works great


Fiat MJD6F3 - OBD read 1hr 45min, FULL SYSTEM (k-line) read 30mins. WRITE full system k-line (with checks) - 20mins - 100% with ECUHELP KT200 ecu programmer.

Edc17c46 OBD vr read, mods to vr and write 100% with ECUHELP KT200 ecu programmer.

Q: ECUHELP KT200 no problem on Peugeot md1cs003 read and write checksum tprot?
A: for my part until 2020 Peugeot 3008 I have had no problem.

Q: Possible ECUHELP KT200 read write Ssangyong Mpc555?
A: yes. 

Q: Dcm 3.5 ford? Anyone tested using kt200?
A: yes, in bdm/jtag mode.


Q:     Anyone read 1.4 tsi vag eku med17.5.2 using ECUHELP KT200 ECU Chip Tuning tool?
A: Boot yes.

Q: Hi I Have KT200 full offline + HPROG, I try install kt200 software, KT200 service /download software/ but no possible open folder.

1. Uninstall KT200
2. Download KT200 offline.  
3. Install Setup

Q: edc16c34 not read,Any read via obd?


I read one but in bench because i did immo off.
Yes on bench sure … but read OBD is not okay.

edc16c34 never obd. edc16c34 ford, psa best BDM. 

Q: How to solve KT200 software auto close when trying to open?
A: Just open kt200 service, And reset device, And will work.

KT200 can read and write Marelli 4AVP with no issues




KT200 ecu programmer can read and write BOSCH MD1CS018 ECM without any errors, the operation way is as the same as mg1cs026.
 

KT200 ECU Programmer VW Polo 1.4 TDI DCM6.2V VR / Write OK.

 
......

To be continued...

Stay informed about successful and unsuccessful attempts, enabling you to make informed decisions for your ECU programming needs.